Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

PIX to PIX VPN hang after a while

Connect two microsoft networks thru VPN with to PIX 501.

ping to both networks work fine. (VPN is ok).

when i try to open a service like directory shares it works for a short time then the vpn connection crash (hangs) and i recieve some messages on console:

06015: Deny TCP (no connection) from 192.168.11.10/445 to 192.168.10.2/1773 flags ACK on interface outside

what goes wrong?

why is it working for a short time?

do i have to explicit permit tcp 445 traffic between the two networks?

!--- Access-list to avoid Network Address Translation (NAT) on the IPSec packets

access-list 101 permit ip 192.168.10.0 255.255.255.0 192.168.11.0 255.255.255.0

1 REPLY
Silver

Re: PIX to PIX VPN hang after a while

Hello,

For PPTP, 1723 TCP needs to remain open. Add a conduit for that.

97
Views
0
Helpful
1
Replies
CreatePlease to create content