PIX to Router IPSec VPN - Static to Dynamic IP addressing
Due to the @home debacle, we are now being forced to get DHCP addresses on our deployed 806 routers which VPN into our Central Site PIX. The problem is how do I route (from the PIX) to the client site where they may have more than one static internal addresses? Any example would be appreciated
Re: PIX to Router IPSec VPN - Static to Dynamic IP addressing
Often times complex configuration issues are best addressed in an interactive session with one of our trained technical assistance engineers. While other forum users may be able to help, its often difficult to do so for this type of issue.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...