Hello, we are trying to place partner networks on discrete vlans on one interface of our PIX (PIX version 7).
An engineer has been in and configured the PIX (see attached - pix7config)
from looking at it I have the following questions:
* Does it make a difference that ethernet 2 has no security level?
* When I look on asdm interface ethernet 2 shows as native vlan - can the pix have native vlans - I thought native vlans were deliberately unavailable for security reasons (vlan hopping) - would this be a better suggestion - (see attached - suggestconfig)
* is the physical & security level purely for PIX version 6.3 and not relevant to PIX version 7?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...