Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PIX: VPN Client Connects but no access to internal

Hello,

I'm connecting to a PIX515 using the Cisco VPN client. The client connects, assigns me an IP address, DNS servers, etc, but I cannot access anything on the internal network.

I am initiating the connection from a remote site that is also behind a PIX515 doing PAT.

Any ideas welcomed. Config is attached for reference.

Thanks,

= K

2 REPLIES
Gold

Re: PIX: VPN Client Connects but no access to internal

try applying the command "isakmp nat-traversal 20".

also, verify whether the host 172.20.29.1 has a valid route for the vpn client pool subnet.

New Member

Re: PIX: VPN Client Connects but no access to internal

Thank you very much.

Adding the nat-traversal command solved the problem.

= K

162
Views
5
Helpful
2
Replies