PIX: VPN Client Connects but no access to internal

[kschafer]

Hello,

I'm connecting to a PIX515 using the Cisco VPN client. The client connects, assigns me an IP address, DNS servers, etc, but I cannot access anything on the internal network.

I am initiating the connection from a remote site that is also behind a PIX515 doing PAT.

Any ideas welcomed. Config is attached for reference.

Thanks,

= K

[jackko]

try applying the command "isakmp nat-traversal 20".

also, verify whether the host 172.20.29.1 has a valid route for the vpn client pool subnet.

[kschafer]

Thank you very much.

Adding the nat-traversal command solved the problem.

= K