Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PIX VPN config example

I'm setting up a PIX firewall as a VPN server, and was wondering if someone can help me with an example config. Here's the way it's setup, the outside int has a public IP and the inside is NAT'ed. there is a PAT global command on the outside int. The VPN clients all run windows 2000 or newer and will be VPNing in from unknown IP addresses. I plan on using pre-shared keys and IPsec 56. I would also like to have the PIX assign the VPN clients dynamic IP addresses. This is my first attempt at configing a VPN server so please bare with me.

thanks Greg

2 REPLIES
Cisco Employee

Re: PIX VPN config example

New Member

Re: PIX VPN config example

Here is a link to a doc on Cisco's website that will tell you everything just exclude the part about the 2.5 client.

http://www.cisco.com/warp/public/110/pix3000.html

89
Views
0
Helpful
2
Replies
CreatePlease to create content