Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

PIX VPN-PPTP & IBM iSeries access for Windows connectivity issue

Hi,

We have a running PIX firewall configured for VPN PPTP access. The VPN connection works fine on any application when remote VPN users are connected to our private network. This includes SNA client software on the remote users try to access the IBM AS400 server.

The issue is remote VPN users cannot access the IBM iSeries server using 520 imulator.

Attached is the PIX running config and error message from 520 imulator.

any feedback will be highly appreciated.

Thanks in advance.

udimpas

1 REPLY
Silver

Re: PIX VPN-PPTP & IBM iSeries access for Windows connectivity i

If the symptom for the error is an IBM iSERIES server with a Fibre Channel disk HBA (Model 2766) requires the F-port mode to be configured in the MDS switch in order to bring up the attached MDS switch port. The issue can be resolved For IBM iSERIES sever with Fibre Channel disk HBA (Model 2766), set the MDS switch port mode to F-port instead of using the default auto-mode.

267
Views
0
Helpful
1
Replies
CreatePlease to create content