I have a VPN setup between a PIX 515E and PIX 515. THe gateway router has 2 interfaces going out. One is a data T1 (which all traffic is going to) and the other is a PTP T1 coming from my site. I was wondering how to send traffic across that interface instead of the data. I am trying to seperate the VPN traffic from the normal internet traffic. I entered the following thinking this would work.
route outside (ip of PIX515 External Interface and subnet) (PTP T1 interface on the gateway router)
The only way I have been able to test it is disablign the orignal interface on the gateway router and seeing if the tunnel is up which it has not been. If you have any ideas let me know.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...