Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PIX506E Setting IP on Ethernet0.?

Hi All,

sorry, just label me an idiot, but, why isn't this working.? Cheers.

coolboarderguy...

pixfirewall(config)# ip address interface ethernet0 192.168.1.2 255.255.255.252

Usage: ip address <if_name> <ip_address> [<mask>]

ip address <if_name> dhcp [setroute] [retry <retry_cnt>]

ip address <if_name> pppoe [setroute]

ip address <if_name> <ip_address> <mask> pppoe [setroute]

ip local pool <poolname> <ip1>[-<ip2>]

ip verify reverse-path interface <if_name>

ip audit [name|signature|interface|attack|info] ...

show|clear ip audit count [global] [interface <interface>]

show ip address <if_name> [pppoe|dhcp [lease|server]]

pixfirewall(config)#

  • Other Security Subjects
3 REPLIES
Silver

Re: PIX506E Setting IP on Ethernet0.?

The syntax is

ip address outside 192.168.1.2 255.255.255.252

Instead of using e0 or e1, use the name you applied to the interface, defaults to inside or outside. This is case specific and can be changed with the nameif command.

Andy

New Member

Re: PIX506E Setting IP on Ethernet0.?

Hi All,

thanx, I'll pick up my dummy award on the way out. Cheers.

coolboarderguy...

Silver

Re: PIX506E Setting IP on Ethernet0.?

Dont worry, least it fixed the problem

Andy

106
Views
0
Helpful
3
Replies