Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Pix515 E and VPN Client

I can connect from a pc to my pix with vpn but i do not have local access to my network. it connects fine but on the vpn client it say local lan is disable what am i missing..need help fast please....thanks in advance...nahumkL83@hotmail.com or klynn@gwusd.org

3 REPLIES

Re: Pix515 E and VPN Client

If you are running code version 7.x in your PIX you need this link configuration .

Local-LAN access while internet is still encrypted through asa.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702992.shtml

If your PIX is still under 6.x above link is not feasable , therefore you need split tunneling configuration - no internet will be encrypted through the tunnel but through your regular internet, and access to your local lan resources.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml

Regards

Re: Pix515 E and VPN Client

Kendall, are you still having issues? if so pls post your config to assist.

Regards

New Member

Re: Pix515 E and VPN Client

no i am not...thank you very much

139
Views
0
Helpful
3
Replies