Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PIX515 - How to save image to TFTP server?

From PIX 515 manual, I read "how to download a PIX 515 image over TFTP", but I cannot find "how to save image to TFTP server". I think I must save first and then am able to download. Please advice, thanks in advance.

5 REPLIES
Gold

Re: PIX515 - How to save image to TFTP server?

Hi -

Don't know if you've read the following document, hope this helps.

http://www.okena.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a5d.shtml

Regards.

New Member

Re: PIX515 - How to save image to TFTP server?

Actually, I looked at this document and it didn't have copy flash tftp...

New Member

Re: PIX515 - How to save image to TFTP server?

copy flash tftp as opposed to copy tftp flash

Just remember copy source >> destination

New Member

Re: PIX515 - How to save image to TFTP server?

'copy flash tftp' doesn't work, at least with Pix 6.1(3). Instead use 'write net []:'.

bd

New Member

Re: PIX515 - How to save image to TFTP server?

sorry guys, there is no way to copy the IOS image (say 6.3.1) from the PIX to a TFTP server, you can only copy from the TFTP server to the PIX;

copy tftp flash:IMAGE

Just for reference:

write net tftp_IP:filename

will only copy the config file from the PIX to the TFTP server (not the IOS image).

copy flash tftp

only works on a router.

Hope this helps

Jeff

792
Views
0
Helpful
5
Replies
CreatePlease to create content