Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

pix515e dmz webserver

internet user and inside can't access webserver on the DMZ! why???

The follow is configration list!

PIX Version 6.2(2)

nameif ethernet0 outside security0

nameif ethernet1 inside security100

nameif ethernet2 dmz security50

enable password 8Ry2YjIyt7RRXU24 encrypted

passwd 2KFQnbNIdI.2KYOU encrypted

hostname pixfirewall

fixup protocol ftp 21

fixup protocol http 80

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol ils 389

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol sip 5060

fixup protocol skinny 2000

names

access-list acl_out permit tcp any host 61.53.x.x eq www

access-list acl_out permit icmp any any

access-group acl_out in interface outside

pager lines 24

interface ethernet0 auto

interface ethernet1 auto

interface ethernet2 auto

mtu outside 1500

mtu inside 1500

mtu dmz 1500

ip address outside 61.53.x.x 255.255.255.248

ip address inside 192.168.0.1 255.255.255.0

ip address dmz 10.100.0.1 255.255.255.0

ip audit info action alarm

ip audit attack action alarm

no failover

failover timeout 0:00:00

failover poll 15

failover ip address outside 0.0.0.0

failover ip address inside 0.0.0.0

failover ip address dmz 0.0.0.0

pdm history enable

arp timeout 14400

global (outside) 1 61.53.x.x netmask 255.255.255.248

nat (inside) 1 0.0.0.0 0.0.0.0 0 0

static (dmz,outside) 61.53.x.x 10.100.0.2 netmask 255.255.255.255 0 0

route outside 0.0.0.0 0.0.0.0 61.53.x.x 1

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 si

p 0:30:00 sip_media 0:02:00

timeout uauth 0:05:00 absolute

aaa-server TACACS+ protocol tacacs+

aaa-server RADIUS protocol radius

aaa-server LOCAL protocol local

no snmp-server location

no snmp-server contact

snmp-server community public

no snmp-server enable traps

no snmp-server enable traps

floodguard enable

no sysopt route dnat

telnet timeout 5

ssh timeout 5

terminal width 80

Cryptochecksum:8cb8e140233a5b2128220f25bcbb8dcb

: end

[OK]

2 REPLIES
New Member

Re: pix515e dmz webserver

Hi:

Apply your ACL to the DMZ:

access-group acl_out in interface DMZ

This should work...please give a feedback..

best regards / Sampath.

New Member

Re: pix515e dmz webserver

however! can't access webserver! I'm morose!

133
Views
0
Helpful
2
Replies
CreatePlease to create content