08-20-2003 10:44 PM - edited 03-09-2019 04:30 AM
Hi
How can I configure ospf across the PIX ?.
I am using PIX 520 with version 6.2.
Is it possible configure OSPF across the PIX firewall??
Please help me.
Ishwar
08-21-2003 02:41 AM
First off, you will need to upgrade to 6.3 code on the PIX to pick up OSPF support. The take a look at the following information:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/config/bafwcfg.htm#1140475
I would suggest you re-post with specific questions if you are still having trouble. The OSPF code on the PIX was ported from IOS so it works pretty much the same with just a few exceptions.
Scott
08-21-2003 08:18 PM
Hi
Does PIX 520 support the 6.3 version as the PIX 520 has reached the end of life status ??
Ishwar
08-21-2003 09:29 PM
The PIX 520 will support PIX 6.3 code. 6.0 was the last cutoff we had for certain hardware not being supported.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide