Pix520 to 5002 connection

[kcopping]

Having problems connecting more than 1 client to a 5002 Concentrator using a PAT address on a Pix520. The client has NAT Transparency Mode turned on. Even if I create a static translation I cannot get more than 1 client to connect and pass traffic. I was able to get it to work on a 7206 with some slight tweeking on the NAT timeouts. Any help would be great.

[wdrootz]

You might want to check with Cisco to make sure that’s a supported configuration first. I couldn’t find anything online.

[rak_shah]

please refer to the bugid CSCdt23585 and CSCds40796. These are i think similar to your case.

regds