We already have logging configuration enabled on our PIX525 running on 6.3. logging timestamp command is also enabled. The timestamps show up on the syslog server. However the timestamps are not there when running show logging on PIX itself.
Could someone confirm for me that PIX just doesn't support timestamp itself in the logging cache or how could I get it fixed?
When a PIX is set up to send syslog messages, levels of lower importance include levels of higher importance. For example, if the PIX is set for warning, then error, critical, alert, and emergency messages are also sent in addition to warning. A debug setting includes messages at all eight levels.
Thanks for the reply. I understand the difference of logging levels. And I could see the timestamps in the syslog server. However the timestamps do not show up on PIX itself when I run show logging (logging timestamp has been configured). Now I think PIX was designed like thist and the timestamps will neven be seen on PIX.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...