I ordered PIX515E-UR and my vendor delivered a firewall that is labelled PIX515E. But the box is labelled PIX515E-UR. My question is whether PIX515E-UR is labelled as PIX515E or PIX515E-UR on the part. Is there anyway definite way to distinguish them?
The chassis is the same for both. The UR bundle has extra RAM, it also has a difference license that allows you run failover on the pix. You can check the RAM and the extra features by doing a "show ver" on the pix.
You can check the following link for the differences between the Restricted and Unrestricted bundles:
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...