Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

port forwarding with pix 501

i am using pix 501.

now what i want to do is to forward port number suppose <ExternalIPaddress>:8080 to internal ip address suppose 192.168.221.1. how can i do this.

can somebody help me.

regards

pradeep

  • Other Security Subjects
2 REPLIES
Silver

Re: port forwarding with pix 501

Use the static command. See the following website for more detailed information and examples.

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a008017278e.html#wp1090663

Hope this helps

Steve

Gold

Re: port forwarding with pix 501

depends on the number of public ip.

for one:

static (outside,inside) tcp interface 8080 192.168.221.1 8080 netmask 255.255.255.255

for multiple:

static (outside,inside) 192.168.221.1 netmask 255.255.255.255

do remember to issue "clear xlate" afterwards, and inbound acl is required.

171
Views
0
Helpful
2
Replies