Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

port forwarding

I need to host email, www inside of my firewall. I am using a cisco 1710 router with fw/ids/ipsec IOS. How would I forward specific ports from the Internet to specific host on my internal network?

With a pix I would need more than one IP public address. I am hoping this is not true with the router.

thanks

2 REPLIES
Gold

Re: port forwarding

for ios router,

ip nat inside source route-map nonat interface Dialer1 overload

ip nat inside source static tcp 25 interface Dialer1 25

ip nat inside source static tcp 80 interface Dialer1 80

access-list inbound permit tcp any host eq 25

access-list inbound permit tcp any host eq 80

further, pix is also capable to achieve the same objective.

New Member

Re: port forwarding

So by creating the dialer interface with route-map I can use the single ip address assigned to me for both Internet access and forwarding needed ports to specific internal hosts. This looks like it will work. I will test it today

Thanks

151
Views
0
Helpful
2
Replies