Re: Port Redirection with one External IP to Multiple Internal I
I'll assume the .333 host address is a typo :-)
I'll also presume you've applied the ACL to the outside interface with:
> access-group acl_out in interface outside
The problem though, is probably that traffic from the internal host 172.16.1.10 has gone outbound first. When this happens, the PIX will check it's nat/global config and create a translation for this internal host to an address in the global pool. Now, the PIX can have one, and only one, translation for each host, so if traffic now tries to come into this host on the dns or lotusnotes ports, this is invalid cause the PIX already has a translation for the internal host, since it has previously sent outbound traffic. You need to ensure that outbound traffic from this internal host get's NAT's to the 22.214.171.1243 address, you do this with:
> nat (inside) 50 172.16.1.10 255.255.255.255
> global (outside) 50 126.96.36.1993
This should resolve any issues you're having. Make sure you remove 188.8.131.523 from any other global pools.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...