Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Port Security mac-address-sticky violation issue

On all of the access ports, port security is turned on and has been effective for quite some time...

switchport port-security

switchport port-security mac-address-sticky

We have just started to push an OS upgrade over the network from win2k to xp and sometime during the image push, port-security is triggered and shuts down the port. No computers are being moved and the same NIC is being used.

The port security should only be monitoring the mac address and that obviously does not change. So, does anyone have any idea of what could be triggering the err-disable state?

2 REPLIES

Re: Port Security mac-address-sticky violation issue

Strange...that is something we need to look at. I would suggest to open a TAC case to identify the issue.

Regards,

~JG

New Member

Re: Port Security mac-address-sticky violation issue

We have a similiar situation here. While attempting to restore files from backup, port security is triggered and shutdown the port. However, when the same operation is done from another system, it works just fine. No system changes on either. Only difference is one is a dual-console system and the other is a single console system. The dual is the one that fails.

Andre

161
Views
0
Helpful
2
Replies