A bit more on the earlier problem, wonder why there are no edit options or I fail to see them.
Re-cap:
Recently upgraded my Cisco PIX 525 from Version 6.3 to version 7.0 (4).
Upgrade was done in accordance with steps mention in this article and was successful: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00804708d8.shtml
The current "sh ver" command output is:
Cisco PIX Security Application Software Version 7.0(4)
System Image file is "flash:/image.bin"
Hardware: PIX 525, 256 MB RAM
Flash: 16 MB
BIOS Flash: 32kb
-------------------------------------------
"Sh flash" output is:
Directory of Flash :/
4 -rw- 2748 downgrade.cfg
7 -rw- 5286296 image.bin
11 -rw- 5437440 image
16128000 bytes total (5294080 bytes free)
--------------------------------------------
"sh mem" displays free memory 77% and used memory as 23%
-------------------------------------------
When I try to upgrade asdm by giving the command copy tftp flash and specify filename asdm-501.bin from source to destination from my tftp server, after downloading the file for a few seconds, console returns an error message:
"% error copying tftp://1.2.3.4 /asdm-501.bin (Not enough space on device)
Also, PDM has stopped working post upgrade to Version 7.0. Seems like my flash memory is full.
Any advise o what to do here??