I'm currently using Cisco 2511 to accept PPP connections through asynchronous ports. I've configured PPP to authenticate locally and it works just fine, but the problem is i can't see the username of the person who connected to my asynchronous line.
Line User Host(s) Idle Location
1 tty 1 Async Interface 00:00:00
That's it, no user is seen on terminal 1 but the user is there online.
what commands are you using to get that info. You can do a "show users" to view the current users. If you want the info logged, you probably have to set up aaa accounting and set up a radius or tacacs+ server. Hope this helps.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...