Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

pptp connection

Dear all,

I have one unit cisco 2610 , i need to form pptp with windows 2k , what i need to use commnd vpdn-group xxxx , please give an advise whick IOS can site to my router DRAM 32M and flash have 16M, thank you .

3 REPLIES

Re: pptp connection

Hi

hope this link helps u out...

http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configuration_example09186a00801e51e2.shtml

for the support in ur current ios code keyin the commands related to the vpdn configs and check.

if its not working out then u need to check out the exact ios code which can fit into ur box with ur current hardware resources..

u need to check this tool for getting the reqd ios to run pptp..

http://tools.cisco.com/Support/Fusion/FusionHome.do

regds

New Member

Re: pptp connection

Hi,

what is the feature name call ? for this vpdn configs , i try to use c2600-is56i-mz.120-28d.bin , no such command for vpdn , give an advise on IOS for my hardware c2600 , please help me , thank you

my hardware ver as below

sh ver

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-IO3-M), Version 12.2(7a), RELEASE SOFTWARE (fc2)

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Thu 21-Feb-02 03:13 by pwade

Image text-base: 0x80008088, data-base: 0x809E77E8

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Router uptime is 1 minute

System returned to ROM by power-on

System image file is "flash:c2600-io3-mz.122-7a.bin"

cisco 2610 (MPC860) processor (revision 0x203) with 28672K/4096K bytes of memory.

Processor board ID JAD05310L7A (371552987)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

Basic Rate ISDN software, Version 1.1.

1 Ethernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

1 ISDN Basic Rate interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Hall of Fame Super Gold

Re: pptp connection

I have not found a feature set with the features that you need that will run in 32 MB of memory. I found one realease in 12.1 code that only required 40MB. But most are like this one c2600-ik9s-mz.122-23f.bin which was the first version in the 12.2 releases to attain GD status and they require 48 MB of memory.

HTH

Rick

115
Views
0
Helpful
3
Replies
CreatePlease to create content