Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

PPTP routing and Windows 2000 RRAS

I'm trying to setup a site to site VPN connection between our corp office PIX and a remote Windows 2000 RRAS server. If I'm using the command:

ip local pool bigpool 192.168.35.1-192.168.35.50

and a Windows 2000 RRAS PPTP connection picked up the address 192.168.35.5, through it's Internet connection. and the RRAS server also had a LAN subnet of 172.16.28.0/24. How do you route back through your PIX so you can see resources on the RRAS server's LAN segment from the Corp office?

I hope this question is legible.

1 REPLY
Silver

Re: PPTP routing and Windows 2000 RRAS

It sounds like you’ll need a router inside unless you can translate to the same subnet. The PIX can’t route. Maybe I don’t fully understand your situation.

205
Views
0
Helpful
1
Replies
CreatePlease to create content