03-17-2004 03:15 AM - edited 03-09-2019 06:46 AM
I have a 506E, I've just upgrated to OS 6.3(3), I have tried to upgrade the pdm to pdm-301 but am having problems as below....
ukpix#copy tftp flash
Address or name of remote host [10.170.10.118]?
Source file name [:]? pdm-301.bin
copying tftp://10.170.10.118/pdm-301.bin to flash:image
[yes|no|again]? y
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Received 3126944 bytes
No PIX image found in downloaded file
Image not installed
ukpix#
Thanks very much.
03-17-2004 07:35 AM
Check the website below for the correct procedure.
Hope this helps.
Steve
03-17-2004 10:43 AM
The command for upgrading PDM is
copy tftp flash:pdm
If you give "copy tftp flash" it takes by default the image to be PIX Image. That's the reason why its giving an error message.
Once you give copy tftp flash:pdm, it will work fine.
03-19-2004 03:48 AM
Thats done it, thanks very much for your help.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: