Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Problem Upgrading PDM

I have a 506E, I've just upgrated to OS 6.3(3), I have tried to upgrade the pdm to pdm-301 but am having problems as below....

ukpix#copy tftp flash

Address or name of remote host [10.170.10.118]?

Source file name [:]? pdm-301.bin

copying tftp://10.170.10.118/pdm-301.bin to flash:image

[yes|no|again]? y

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Received 3126944 bytes

No PIX image found in downloaded file

Image not installed

ukpix#

Thanks very much.

3 REPLIES
Silver

Re: Problem Upgrading PDM

New Member

Re: Problem Upgrading PDM

The command for upgrading PDM is

copy tftp flash:pdm

If you give "copy tftp flash" it takes by default the image to be PIX Image. That's the reason why its giving an error message.

Once you give copy tftp flash:pdm, it will work fine.

New Member

Re: Problem Upgrading PDM

Thats done it, thanks very much for your help.

103
Views
0
Helpful
3
Replies