Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problems with a CSC SSM20 module.

Hi,

I have a firewall ASA5520 that has a CSC SSM20 module in it.

The module as the last OS (CSC SSM 6.3.1172.0), and the firewall as the OS 8.0(4).

The CSC SSM20 module, and the firewall, is configured like Cisco advice for this case.

The thing is like this,

when I put the module at work, doing what it was built for, sometimes the CPU goes to 100% of use.

I say some time, but it's more like … frequently.

At these times the memory is ¼ at use.

When this happens, the client has no access to the Internet.

It's like the module has blocked the Internet access.

Can someone help me, please?

Thanks in advance,

Rui

1 REPLY
New Member

Re: Problems with a CSC SSM20 module.

Hi,

I had exactly the same problem. TAC investigated for weeks and found that it is caused by HTTP debugs running. Try tuning off all debug logs under "Logs -> Settings"

Interestingly it was TAC that asked me to switch them on in an earlier case.

It seems OK now.

133
Views
0
Helpful
1
Replies