Problems with Custom Signatures if you choose the wrong description
Today I got a problem with a custom signature, I added with .SigWizMenu on a 3.x IDS. I choosed the description
IP Protocoll 77
This caused an error, because the word Protocoll is a keyword in the etc/SigUser.conf file. It caused an error within SigWizMenu and within packetd.conf at sensor restart. It looks like that any keyword which is used in the SigUser.conf file will cause problems.
Re: Problems with Custom Signatures if you choose the wrong desc
In version 3.x you can not use keywords as data in other fields. This problem is fixed in the version 4.x sensors.
If you need to remove the Protocol word from your description you can directly edit the configuration files (either SigSettings.conf or SigUser.conf) to remove that word from the description field. Then nrstop and nrstart to have packetd read in the corrected configuration.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...