Everytime I enable loggin with my PIX 515E and arandom amount of time passes it will completely close down all access through the device. Any help would be appreciated. I am running ver. 7.0(1) and I have attached a copy of my config. for all to check.
It appears that you have syslog messages configured to use TCP. This causes the PIX to do synchronous logging and if the messages cannot be delivered to the syslog server no connections are allowed through the device. Change to udp or turn off synchronous logging option with ?logging permit-hostdown?.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...