Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

QM FSM error on a 3005 VPN doing LAN-to-LAN

Can anybody help me understanding these errors on a VPN 3005, configured for LAN-to-LAN. Is it a configuration issue or a Hardware issue.

60534 10/28/2002 05:16:04.220 SEV=4 IKEDBG/0 RPT=75

QM FSM error (P2 struct &0x1d07664, mess id 0x4bb56838)!

60535 10/28/2002 05:16:04.220 SEV=4 IKEDBG/65 RPT=5452 65.206.223.10

Group [65.206.223.10]

IKE QM Initiator FSM error history (struct &0x1d07664)

<state>, <event>:

QM_DONE, EV_ERROR

QM_WAIT_MSG2, EV_TIMEOUT

QM_WAIT_MSG2, NullEvent

QM_SND_MSG1, EV_SND_MSG

1 REPLY
Silver

Re: QM FSM error on a 3005 VPN doing LAN-to-LAN

You ussually get such errors when there maybe some issue with ike. If you are experiencing problems, check that the ike config is correct/matches.

If this is something that comes up every now and again on a working config, it could be a renegotiation happening, and the peers are negotiating the available ike's until it matches.

Regards,

383
Views
0
Helpful
1
Replies