10-05-2010 02:50 AM - edited 03-09-2019 11:11 PM
Hi,
Please give suggestion on this error "One or More Modules Reporting an Error" message.
Snapshot is attached for refrence.
Thanks,
Abuzar
10-05-2010 08:05 AM
Abuzar,
Check here for config help:
HTH,
Faisal
--
If you find this post helpful, please rate so others can find the answer easily
10-08-2010 07:11 AM
Abuzar,
With the netwatch module, if you do not have an interface configured or there is no traffic being seen on the configured interface the module will display this error message. This error can be ignored if you have not yet configured the module and is normal for an unconfigured module.
To correctly configure the module configure a spare interface on your collector with an ip address and either span traffic to that interface or configure a DHCP helper to forward DHCP traffic to that interface.
--Jesse
10-10-2010 11:01 PM
Thanx for the valuable in formation Jesse.
-Abuzar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide