Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RADIUS IOS/PIX (009/001) attribute for user on VPN 3002

Hello all,

I have a 3002 VPN HW client building an IPSec VPN to a 3015 VPN concentrator. An ACS (3.3) server is being used for external RADIUS authentication. There is a user configured on the 3002 HW client and the ACS (RADIUS) server. It authenticates sucessfully when building the IPSec tunnel. All works well, but I would like to use a seperate ACL for this user to limit network access. Is it possible to use the RADIUS IOS/PIX attribute (009/001) for downloading ACLs for this 3002 HW client?

I want the user configured for authentication purposes (on the 3002 HW client) to download an ACL to limit network access.

As always, thanks for your help.

-Mike

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: RADIUS IOS/PIX (009/001) attribute for user on VPN 3002

2 REPLIES
Cisco Employee

Re: RADIUS IOS/PIX (009/001) attribute for user on VPN 3002

New Member

Re: RADIUS IOS/PIX (009/001) attribute for user on VPN 3002

Gfullage,

Thanks for the link.

-Mike

117
Views
0
Helpful
2
Replies
CreatePlease login to create content