12-30-2005 10:28 AM - edited 02-21-2020 02:10 PM
Hello all,
I have a 3002 VPN HW client building an IPSec VPN to a 3015 VPN concentrator. An ACS (3.3) server is being used for external RADIUS authentication. There is a user configured on the 3002 HW client and the ACS (RADIUS) server. It authenticates sucessfully when building the IPSec tunnel. All works well, but I would like to use a seperate ACL for this user to limit network access. Is it possible to use the RADIUS IOS/PIX attribute (009/001) for downloading ACLs for this 3002 HW client?
I want the user configured for authentication purposes (on the 3002 HW client) to download an ACL to limit network access.
As always, thanks for your help.
-Mike
Solved! Go to Solution.
01-02-2006 08:34 PM
01-02-2006 08:34 PM
This should help you along:
http://www.cisco.com/en/US/tech/tk59/technologies_configuration_example09186a0080094eac.shtml
01-04-2006 09:45 AM
Gfullage,
Thanks for the link.
-Mike
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: