01-25-2006 10:56 AM - edited 02-20-2020 09:35 PM
I am having issues telnet to a particular host. I added the acl for the hosts. Here is a example of what needs to be done. hostA can't telnet to Host B.
access-list xxx_pub_acl line 17 permit tcp host hostA_pub host HostB_inside eq 23
Hardware: PIX-515E, 64 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0x300, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
01-31-2006 09:32 AM
Telnet is an insecure communications protocol, so the PIX will not allow Telnet to its outside interface. You can Telnet to any other interface of the PIX; if you are running PIX Software versions 5.2 or later and have a VPN-DES activation key, you can use Secure Shell (SSH) to connect to the PIX's outside interface
02-01-2006 04:47 PM
just wondering if nat/pat has been configured.
e.g.
static (inside,outside) tcp interface 3389
access-list inbound permit tcp any interface outside eq 3389; or
static (inside,outside)
access-list inbound permit tcp any host
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: