04-10-2003 08:20 AM - edited 03-09-2019 02:51 AM
Hi,
I have a problem with my pix. I have my pix with outside ip "213.36.80.163", i have a pc in the lan with an ftp server with ip "10.0.1.1". I want redirect internet ftp traffic to my local pc.
I have tried this solution :
- static (outside,inside) tcp 10.0.1.1 21 213.36.80.163 21
But that not work.
If someone have an idea ... :)
Thx u in advance
Kenshin
04-10-2003 01:02 PM
static command makes only a route wich you can use later.
after static command, you must have a ACL or a conduit.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/prod_configuration_examples_list.html
Hope that helps
mc
04-10-2003 10:33 PM
Thx u very much
i'll tried with an access-list
Kenshin
04-13-2003 12:48 PM
HI.
- static (outside,inside) tcp 10.0.1.1 21 213.36.80.163 21
You should reverse the order:
static (inside,outside) tcp 213.36.80.163 21 10.0.1.1 21
And add ACL as mentioned.
Look here - Using nat, global, static, conduit, and access-list Commands and Port Redirection on PIX:
http://www.cisco.com/warp/public/707/28.html
Yizhar
04-13-2003 10:30 PM
thx you for your answer, I'll look the url
Kenshin
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: