Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Remote access to pix

I'm new to the VPN world. My office would like to have all Remote users come into the corp network via the internet. We have a pix 520 running 6.0.2 with vpn -des enable. can i do this with software on the pixs or I need additional hardware to complete this project. please advice or point me to some Cisco Doc.

Thanks

2 REPLIES
Cisco Employee

Re: Remote access to pix

You can do this with what you have. You might want to buy a 3DES icense for the PIX to be a little more secure.

You can either load the Cisco VPN Client onto each machine and use IPSec to VPN in, or if you don't want to load extra SW onto the PC's, you can just create a Dial-Up Networking connection and PPTP straight in.

Sample config for IPSEC and VPN Client is here (note this is the 3.x client in this config):

http://www.cisco.com/warp/public/110/pix3000.html

Sample config for PPTP into a PIX:

http://www.cisco.com/warp/public/110/pptppix.html

New Member

Re: Remote access to pix

Thanks, I will read over these doc's.

85
Views
0
Helpful
2
Replies
CreatePlease to create content