I use a Cisco 831 IOS router as a gateway to access to my inside network from the Internet using the cisco VPN client. This works very well.
But since I setuped the remote access on the router, i am not able to mount VPNs to my clients from the inside of my network. To make it works, I need to remvove the crypto map from the external interface:
no crypto map mymap
Anybody has an idea on how to make this setup working ?
Hi .. basically you need to create a Dynamic crypto map for your remote users and a static crypto map for your site to site VPN. The dynamic map needs to be binded to the static one and then the static map gets applyed to the interface ..
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...