crypto ipsec transform set FirstSet esp-3des esp-md5-hmac
tunnel-group nslgroup type ipsec-ra
tunnel-group nslgroup general-attributes
tunnel-group nslgroup ipsec-attributes
crypto dynamic-map dyn1 1 set transform-set nslSet
crypto dynamic-map dyn1 1 set reverse-route
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface outside
After i connected successfully I look at my VPN adapter configuration under IPconfig/all and this is what i got
IP address 192.168.4.10
I have no issue connecting my cisco VPN client from outside, No problem with the user authentication as well. But i am facing a issue when I try to ping any internal servers i am not getting a respone at all.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...