Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Remote Access VPN

Hi,

I'm configured a Remote Access VPN on a Cisco PIX version 7.0, when I connect using the Cisco VPN Client and try to access and inside Host, the adsm syslog display a "110001:No route to INSIDEHOST from CLIENTADDRESS", the pix have a directly connected route to the INSIDEHOST subnet and I can ping both INSIDEHOST and CLIENTADDRESS from the pix. PLZ help...

4 REPLIES

Re: Remote Access VPN

hi

Can you revert the kinda addressing schemes you are using up over there and also the configurations with the public ips masked ..

regds

New Member

Re: Remote Access VPN

My ip pool for Remote Access Users was 192.168.60.20-192.168.60.30 and I changed to 172.0.0.20-172.0.0.30, but I still have the same route problem...

New Member

Re: Remote Access VPN

Hi Angel,

Remove the inside route for your local-pool from the pix configuration.

Make sure you also have:

route outside 0.0.0.0 0.0.0.0 ip_outside_gateway

route inside internal_network/mask ip_inside_gateway

HTH

Mike

New Member

Re: Remote Access VPN

Also you might want to use the following:

access-list nonat permit ip internal_network/mask ip_local_pool/mask

nat (inside) 0 access-list nonat

95
Views
0
Helpful
4
Replies
CreatePlease to create content