Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Remote Access VPN

I have an ASA 5510. I wanna configure it with remote access VPN.

Here is the diagram:

Local---ASA---Modem1---Internet---Modem2-User

I configured it by using ASDM VPN Wizard. But it didnt work. I already

opened ports 1723 and UDP 500 on modem... But when i try to make connection by using Cisco VPN Client, I cant succeed. it gives only NOT CONNECTED message...

Do i need something different on Modem?

Thanks

1 REPLY

Re: Remote Access VPN

Hi

If its a normal MODEM then theres no configuration required since its not an intelligent device to understand the port based traffic patterns.

Are you talking about a modem here in first place instead of a router ??

If its a normal Modem all you have to do is with the ASDM device.

do refer these links for more info on the config part.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805734ae.shtml

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008060f25c.shtml

regds

104
Views
0
Helpful
1
Replies
CreatePlease to create content