On my VPN 3000 I am having problems restricting a range of IP address that are network scanner. I have created a network list with the range of address. I also created a rule for in/out traffic using the network list in the rule. I created a filter and the action is drop. We I VPN in I can get to everything on the internal network I just want this client to be able to get to the network scanners. I am stuck at this point. Any help is needed. Thanks
Re: Remote client restrict access to network scanner
There a few things to check on the concentrator. Is the SNMP server enabled under Configuration | System | Management Protocols | SNMP? What is the default action default action to take when no rules on this filter apply? It should be Drop.
You can find out out under Configuration | Policy Management | Traffic Management | Filters , select Public filter and Modify .
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...