We have a PIX 501 setup using MS VPN client on remote computers to access MS Remote Desktop or Remote Web Workplace. This works OK but when a user tries to print something running on their office computer at their home printer the computer inside the network can not see their local printer at home. Because some of these people consult for several other companies where they are doing this successfully they don't want to install any special software like Cisco VPN Client. I am open to all suggestions.
You will have to configure split-tunnel on the VPN gateway and push it to the VPN clients. This will tell the client on what to encrypt (for VPN) and leave the other traffic in plan text for local printing. Otherwise, all your traffic will be encrypted and sent to the VPN gateway.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...