Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Remote VPN users need to connect to existing site-to-site tunnel

I have two sites:

Site A (ASA5510)

Site B (PIX506E)

There is a working ipsec site-to-site tunnel between Site A and Site B.

I just setup a new config on Site A for remote users. Remote VPN users are able to connect to Site A and access all resources locally.

However they cannot access any resources at Site B. Is this something that's even possible?

The remote users get IPs from remote vpn IP pool, while site-to-site tunnel is setup to protect only the existing internal intefaces. I did not find any place in the ASA to create routes from the remote vpn ip pool to the existing site-to-site tunnel.

Any help with this would be greatly appriciated.

2 REPLIES
Gold

Re: Remote VPN users need to connect to existing site-to-site tu

Hi,

Take a look here...

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

Hope this helps let me know if you need any further help/explanation. And please rate post if it helps!

New Member

Re: Remote VPN users need to connect to existing site-to-site tu

Thank you very much! This is exactly what I was looking for. I now have remote vpn clients that have full access to both sites!

109
Views
5
Helpful
2
Replies