depends what you mean by through a modem, dialed into a network using Microsoft Dialup? You can manage a PIX through the outside interface,the telnet command allows you to specify which hosts can access the PIX Firewall console with Telnet. You can enable Telnet to the PIX Firewall on all interfaces. However, the PIX Firewall enforces that all Telnet traffic to the outside interface be IPSec protected. Therefore, to enable Telnet session to the outside interface, configure IPSec on the outside interface to include IP traffic generated by the PIX Firewall and enable Telnet on the outside interface. I would strongly recommend using VPN client 3.0 with PIX 6.0.1
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...