Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Removing PIX Config

I have a PIX 520 with a 16MB flash memory card in it. I need to remove the config from flash. Sounds Easy, right?

One Problem:

I don't have the enable passwords, and the PIX appears to be using AAA authentication to a non-existent server.

I have already used the password recovery procedure on the PIX, but it doesn't remove the configuration.

Any ideas?

Thanks in advance

2 REPLIES
Cisco Employee

Re: Removing PIX Config

Open a TAC case and they will provide you with an ERASE utility which is used to erase both IOS and configuration.

HTH

R/Yusuf

Community Member

Re: Removing PIX Config

Thanks much. Found another solution to the problem.

85
Views
0
Helpful
2
Replies
CreatePlease to create content