Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

requiring a client firewall be present when connecting to VPN

Is there a way to set the require firewall feature of a group, as is present for a vpn concentrator, for clients making a vpn connection via a PIX, or is that the additional feature set buying a concentrator gets you?

Thank you,

Bill

2 ACCEPTED SOLUTIONS

Accepted Solutions
New Member

Re: requiring a client firewall be present when connecting to VP

go into Group-policy configuration for the policy you are wanting to change and use the below command.

client-firewall [opt | req | none]

Re: requiring a client firewall be present when connecting to VP

Hi .. pleae be aware that this is supported on 7.X code

client-firewall none

client-firewall {opt | req} custom vendor-id num product-id num policy {AYT | CPP acl-in acl

acl-out acl} [description string]

2 REPLIES
New Member

Re: requiring a client firewall be present when connecting to VP

go into Group-policy configuration for the policy you are wanting to change and use the below command.

client-firewall [opt | req | none]

Re: requiring a client firewall be present when connecting to VP

Hi .. pleae be aware that this is supported on 7.X code

client-firewall none

client-firewall {opt | req} custom vendor-id num product-id num policy {AYT | CPP acl-in acl

acl-out acl} [description string]

123
Views
0
Helpful
2
Replies