I have this issue I am working on. I called cisco tech and they said it is not possible and there is no work around. Still I want to ask the experts out there.
here is my scennario...
I have a PIX 515( headquater) - VPN tunnel another PIX 506 ( remote)
I have VPN clients terminating on the PIX 515. The VPN clients who are terminating on the PIX 515 can access the machines at my headquater lan with no problems. These VPN clients want to access the machines which are on the remote LAN ( PIX 506). Is there a way they can terminate on the PIX 515 which they do and then use the tunnel from PIX 515 to PIX 506 and connect to the machines there.?
The PIX does not redirect traffic. If the packets come in the outside interface, the PIX cannot send them back out. You would need another interface, or terminate the client tunnels on a different device behind the PIX.
Thanks for the feedback guyz......I really appreciate that...I have a cisco 2514, which i can use to termintate my VPN clients. VPN 3.0 and higher clients are not yet supported on cisco 2514. so I have to wait for that 12.2 8(T) to be released for cisco 2514
DocumentationCode download linksGoalRequirementLimitationsSupported ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and UCS-E Blades:Step by Step ConfigurationConfigure one of the connectivity options to access the Cisco IMC from the n...
Firepower Threat Defense (NGFWv) on UCS E-series - Transparent Mode in HA
DocumentationCode download linksGoalRequirementLimitationsSupported ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and UCS-E Blades:Step by Step ConfigurationCo...
I am currently unable to specify "crypto keyring" command when configuring VPN connection on my cisco 2901 router.
The following licenses have been activated on my router :