Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Restrict Access to certain IPs in VPN

Does anyone know if there is a way to restrict a user to access only a certain number of IP's through PIX when he/she is connecting through a VPN connection setup on the PIX itself ?

2 REPLIES
Cisco Employee

Re: Restrict Access to certain IPs in VPN

You need to configure split tunneling for this. Only the ip address defined in split tunnel ACL will be accessible by the vpn client.

E.G. You want to restrict the clients to access an inside server only, say 192.168.1.1, and the client pool is 10.1.1.1-10.1.1.10.

Create an ACL :

access-list split permit ip host 192.168.1.1 10.1.1.0 255.255.255.0

vpngroup split-tunnel split

That should do it. To read more about split tunnel :

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/tz.htm#wp1099471

*Please rate if it helped.

-Kanishka

New Member

Re: Restrict Access to certain IPs in VPN

You can also remove the "sysopt connection permit-ipsec" line, and define an inbound ACL to your outside interface.

In that ACL, filter out the traffic from the source IP address (client pool)

110
Views
0
Helpful
2
Replies