Reverse route on EZ-VPN

[ggozzi]

I've a problen in a L2L ezVPN between a Server VPN 3825: ios 12.4-12 and a Client VPN 877: 124-9.T1.bin, in network extension mode.

On the server is specified the reverse route injection.

The problem is: After 1 hour of idle with the tunnel ipsec always on, the static route of the client network disappear.

Can anyone help me?

[Ajit Singh]

Hi,

Use the static keyword after the reverse route command so thet the route is not removed once the tunnel is inactive.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tsec_r/sec_r1ht.htm#wp1236849

Regards,

Ajit Singh

[ggozzi]

When I try to put the static comman I receive this error message

crypto dynamic-map SDM_DYNMAP_1 1

set security-association idle-time 3600

set transform-set ESP-3DES-SHA

reverse-route

!

Conf t

(config)#crypto dynamic-map SDM_DYNMAP_1 1

(config-crypto-map)#reverse-route static

%Static keyword not applicable to dynamic maps, re-enter cmd