Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Reverse SSH via Console port

when setup a reverse ssh to console port, what is required to get this to work.I have in the router 16-port asynchronous/synchronous serial network with High-density 8-port EIA-232 asynchronous EIA-232 asynchronous. I have read some of the documentation on setup a console ssh. I have setup individual lines with rotary groups as 1 for all the lines, and configured ip ssh port 2000 to 2007 with rotary 1 and configured login auth, no exec transport input ssh.

When I testing I uses putty ie 192.168.16.22 port 2000, I get a reponses back from the router not the device at the end of the 8 port density octal cable.

1 REPLY
Silver

Re: Reverse SSH via Console port

Connected router Aux to console via rollover cable. execute the following on the router:

show line revealed line 65 to be the aux port

ip host bar01 2065 172.21.130.2

line aux 0 transport input telnet

581
Views
1
Helpful
1
Replies